Posts Tagged ‘diamond’

About Diamond

Tuesday, May 12th, 2009

Diamond colors are graded from letters D to Z with color grade D as the rarest. A grade D diamond is colorless. The lesser the color, the higher is the value of a diamond. Colors can filter the light and will lessen the reflected light affecting the brilliance of the diamond. Some stores offer diamond bracelets and other jewelries in fancy color. These jewelries are graded differently from the white diamonds.

Clearer diamonds are more expensive than diamonds with flaws or imperfections. Like colors, clarity of a diamond is also measured. An internally flawless diamond is rated as FL and IF while a diamond with imperfection visible to the unaided eye is rated as SI2, I1, I2 or I3.

Carat is the weight measurement for diamond. The weight is directly proportional to the size of the diamond therefore the larger the diamond, the higher the carat. It is very rare to find big sized diamonds so the value significantly rises as the size gets bigger.

Another factor to consider when buying a diamond is the grading report, diamond certificate or diamond quality document. The certificate must come from a diamond grading lab documenting the characteristics of the diamond including the four Cs. A team of gemologists prepares the report using industry tools that are designed to measure the quality of a diamond.

What Are Dirty Diamonds?

Wednesday, April 1st, 2009

A dirty diamond is one of two things: a rough diamond, or a diamond that hasn’t been cleaned in a while. Rough diamonds are uncut and unpolished – hence, they are dirty. But that type of dirty diamond will soon be cut and polished and sitting in a beautiful jewel box in a display case. Then someone will purchase it, and before long, it will become a dirty diamond once again.

Diamonds become dirty. When you wash your hands with a diamond ring on, soap scum clings to it. When you put on hand lotion, it gets grease on it. Shower with your diamond earrings or necklace, and again, you get soap scum. In one short day, your brand new diamond could be dirty!

Purchase an ultrasonic jewelry cleaner the same day that you purchase your diamond jewelry, and use it every single day, without fail. The clarity of the diamond changes when the diamond is dirty – it loses its sparkle. By taking one minute each day to clean your diamond jewelry, you can avoid this, and your diamonds will never be dirty!

Ways to Clean your Diamond

Friday, March 27th, 2009

There are a few different ways that you can provide diamond care for your precious jewelry, in particular, there are different cleaning processes you can use to keep it looking as brilliant and sparkling as the day you brought it home from the jeweler!

While there are many cleaning procedures that can be done from your own home, don’t forget that you can almost always return to the jeweler where you purchased your diamond and ask for a professional cleaning.  Sometimes cleanings are included in a warranty agreement, so check your paperwork to see if this form of diamond care is provided in your agreement.

Detergent Bath
The most commonly used method of diamond care is cleaning your diamond in a mild, warm water detergent bath.  Fill a bowl with warm water, and add in a mild detergent that you have in the house.  Some people use a dish detergent, while others will use a gentle bathroom cleaner.  Using a toothbrush or eyebrow brush, gently brush your diamond with the sudsy water to loosen any dirt and oil that have found their way to your diamond.  Afterwards, rinse your diamond by placing it into a strainer (careful to select a strainer with holes smaller than your diamond!) and running it under warm water to remove all soap.  Never use chlorine bleach to clean your jewelry, the cleanser is much too harsh

Quick-Dip
There are many cleaners on the market for diamond care.  Select one and follow it’s instructions carefully for dipping your diamond into the cleanser.  Once you’ve dipped your jewelry into the cleanser, you don’t want to touch the diamonds, because oils from your fingers can be easily transferred to your diamond.  Allow it to dry completely and then wear or return to storage.

Cold Water Soak
Diamond care also includes a process called a “cold water soak”.  Fill a bowl with a solution of half cold water and half household ammonia.  Place your diamond into the cleanser and allow it to soak for at least 30 minutes.  When you take it out, tap the jewelry around the mounting brackets and then swish it around in your cold water solution again as a final rinsing.  You can set it out to dry on a piece of tissue paper.

Ultrasonic Cleansing
You can provide diamond care by purchasing an ultrasonic cleansing machine.  These machines have a little cup that you fill with water and cleanser, and a place to insert your jewelry.  Once you turn on the ultrasonic cleansing unit, it uses high speed motion to clean dirt and oils off your piece of jewelry.

Storing Diamonds
Another important consideration of diamond care is how to store your diamonds when you are not wearing them.  Diamonds are gemstones that can scratch other diamonds or other jewelry, so it is recommended that you never place them into a jewelry box or case with other pieces of  jewelry unless you individual wrap the diamonds with tissue paper.  The best way to properly provide diamond care and store your diamond however, is to place the jewelry piece into a fabric lined jewelry box, or a larger case that has individual dividers that are each lined with fabric to protect each piece of jewelry.